Installation instructions for replacing guitar mechanics buttons

Step by step - simply explained

What do I need for this?

  • Monkey Locks - Locking Tuners

  • Guitar Monkey Buttons

  • Gitarren Mechaniken Bass Mechaniken Locking Tuners Klemm Mechaniken Installationsanleitung Einbauanleitung 2

    Phillips screwdriver
To our Guitar Monkey wood buttons

Step by Step erklärt

  • 1. Loosen the screw and remove the button


    Use the Phillips screwdriver to loosen the button screw.

  • 2. Attach new button



    Put the new button on the shaft of the guitar mechanics and turn it slowly until you notice that the insert of the button snaps easily into the shaft. Now press the button down carefully and with feeling until it sits firmly on the shaft.


    ATTENTION: Different manufacturers have different shafts, which means that not all buttons fit every guitar mechanism. Therefore, the accuracy of fit must be ensured beforehand.


    Click here to learn more about accuracy of fit.

  • 3. Screw the button tight



    Use the Phillips screwdriver to tighten the new button.


    ATTENTION: Please do not tighten the screw too much!

Adjusting the mobility

  • Whether the mechanism is harder or easier to turn can be easily adjusted with the button screw.


    1. Simply turn the screw to the left to loosen it and the mechanism will turn more easily.


    2. Simply turn the screw to the right to tighten it and the mechanics will become more difficult.

Our guitar mechanics wooden buttons

Show all

Unsere Monkey Locks - Locking Tuners

Show all

Our bass mechanics

Show all